Simple Diy Satellite Dish Installation


DIY Satellite Dish InstallationThe popularity and affordability of satellite TV has grown massively over just a short few years, but before we can enjoy the fruits it has to offer we need to install that lovely white dish, but alas companies charge quite a handsome fee so why not save yourself some money buy learning to perform a DIY satellite dish installation. Pay full attention, because it’s not as easy as you think, it needs accuracy and careful adjustment and not to mention decent insulation too. If you follow the steps carefully your diy satellite dish installation could be done in a few hours.

Before proceeding with any sort of electrical installation it’s important to mention to keep safety in mind, not only for yourself, but also for your family. Loose or hanging cables are very dangerous and need to be secured with cable ties or tape.

DIY Satellite Dish Installation

Installing a satellite needs some professionalism so start by getting all the accessories you’re going to need beforehand. If you’ve received your full Satellite dish system there should be a manual containing information on what you will need.

In essence there are basically only two parts in the whole installation process.

Step 1 : The first step would involve mounting the mast as firmly and stable as possible.

Step 2 : Secondly when this is bolted down the dish can be mounted onto the mast whereby it can be tightened, but not permanent as you’ll still need to make fine adjustments to the angle depending on where the strongest signal is coming from. Everything after this involves connecting your antenna to your television via the coaxial cable.

Let’s Break DIY Satellite Dish Installation Down A Bit

  • Get all the required tools and accessories
  • Find a secure place on or around your home where you want to mount the dish keeping in mind that the area must free and open from any obstructions.
  • Mount the mast securely and make sure that it’s perpendicular to the ground using a level.
  • Once done attach the dish and antenna to the mast securely but leave loose to allow you to maneuver the whole satellite dish for optimal DIY satellite tracking.
  • Position the satellite dish in a south west direction or try having a look at how your neighbors have done it. Copy them and adjust the azimuth (left to right) and elevation (up and down) to maintain a satisfactory angle.
  • Test the signal by using a signal meter for accurate readings that can save you time. Use the signal meter to attain the best signal while moving the dish and only bolt it down wherever the DIY satellite tracking signal is strongest.
  • Take the coaxial cable inside the dish and run it through and out to where you can find the LNBF connector is. Connect these two.

From here the manual instructions should be able to guide you safely in your attempt to do a quality diy satellite dish installation, but as always consult a technician if you run into any problems.

Laymen’s Satellite Dish Installation GuideDIY Satellite Dish Installation

Satellite television is becoming ever increasingly more popular and affordable with over 1000 different channels to watch what better way to spend time with your family, but before the fun, the dish needs to be mounted so you can either pay someone to do it which can be costly or your can do it yourself and follow this satellite dish installation guide. So grab your gear and start following this satellite dish installation guide.

The Dish 1000 satellite guide allows the users to not only watch over 1000 channels, but it also empowers the user to view some of those programs in high definition. The first step is to obviously order the satellite package and when it arrives get ready to rip open the box. The most important thing here is to take out the dish 1000 installation guide and get together all the bit and bobs that you’re going to need.

Satellite Dish Installation Guide

Step 1:

  • Begin by gathering the specifics of the azimuth, elevation and skew angles. These specifics should contain the details of your location. Also keep your cable ties handy to tie up any loose ends that might be dangerous.
  • Go outside and find the best possible place for you to mount your satellite dish, but keep in mind that there should be no obstructions of any kind. This is because the dish needs a clear line of sight towards the sky.
  • Get your tools and start mounting the mast. Its of utmost important to mention that the mast needs to be extremely stable, so make sure you’ve picked a good spot on the roof, ground, wall or porch. Make sure the mast is plumb and has space to move.
  • Take the antenna and start attaching it to the dish remembering to set the elevation and skew angles appropriately according to the specifications. Take it from here and mount it onto the mast, adjusting the azimuth angle, be careful to pay attention to detail.

Step 2:

  • Next you begin working with the cables by running the antenna cable through the dish and connect it to the switch. Now take the switch and connect it to the receiver.
  • You should also have received a signal meter which should be connected to the satellite dish and use this to start checking for a strong signal. While checking for a signal follow the sky dish installation guide as indicated and move the dish degree by degree until you’re happy.
  • You should’ve by now drilled a hole into the lounge where the dish cable should run through to the tv and receivers. From here you just need to connect the appropriate cables to the switches and receivers and set up the channels as indicated in the dish 1000 installation guide.

Whether you use prepaid or free to air you’re guaranteed to enjoy its bounty. Follow this satellite dish installation guide as a basic guide only and always consult a professional when you run into complications.

 

No comments yet.

Leave a Reply